TITANIUM. THE NEW GOLD TITANIUM STANDARD IN CAR WASH SCIENCE.
TX4 is a newly formulated, 4-stage process designed with ingredients that work in synergy to offer superior protection, water beading, and shine.
Our groundbreaking Vehicle Surface Modification Technology (VSMT) maximizes the adsorption of each product’s ingredients with stunning results.
This process is the culmination of decades of research, real-world testing and customer feedback, and will become the new standard for tunnel wash systems.
In stage one, unique chelacemistry drastically reduces surface tension, producing a dense, penetrating foam that cleans dirt and oils with exceptional results. The addition of chelating agents chemically binds ions and minerals in the water and on the car, keeping them suspended until rinsed away with X2.
The foaming detergent rinses away ions and minerals suspended in the water and on the car to remove all soils on the vehicle. A combination of acid components is introduced to adjust the pH at the vehicle surface after X1 - a vital component of the final two steps of the process. X2 also maximizes hydrophobicity and shine to provide the ideal environment for the X3 ceramic product.
This unique sealing product modifies the surface of the vehicle with ceramic polymers, forming a protective layer of ceramic which is bonded to all of the vehicle’s surfaces. This layer significantly increases hydrophobicity, protecting the vehicle from rain and harsh weather.
Ideal surface environments introduced by X1 and X2 allow for complete coverage of the ceramic layer, facilitating optimal dry and shine while setting up the vehicle for X4.
This drying agent is a water-based emulsion of pure non-polar solvents. These solvents work together with the ceramic layer, lowering its surface energy and causing the water to break and bead on the surface.
This allows the water to easily drain from the vehicle after the final step and produces the driest cars possible at the end of the wash.
A SHINING EXAMPLE OF SCIENCE AT WORK.
Many wash systems use products that interfere with the efficacy and efficiency of the component ingredients in the final stages, which leaves residual surfactants. Finishing products will adhere to those surfactants instead of the vehicle’s surface. For a better finish, you need to prepare a better surface.
VEHICLE SURFACE MODIFICATION TECHNOLOGY - VSMT
It all comes down to proper preparation at each stage. Engineered to maximize the adsorption (the particles that stick to the vehicle’s surface) of each product’s ingredients, TX4 uses complimentary surfactants in the cleaning stage. This not only prepares the surface for optimal cleaning and lubricity, but works with the ceramic polymers and solvent emulsions in the sealant and drying agent, maximizing protection, water beading, and shine.
CONTACT ANGLES FOR THE WIN
Contact angles are critical to a high-quality car wash process. The better the contact angle (low during cleaning and high during finishing), the more efficiently a vehicle can be cleaned and dried. The TX4 process improves contact angles by up to 20% over industry benchmarks - leading to a better wash with less water and chemistry needed. The end result? You’re going to move cars through the wash faster while lowering your cost-per-car.
This is science at work. And it’s glorious.
MAKE YOUR PROFITS SHINE
The TX4 process is formulated to deliver an excellent cost-per-car value. Coupled with our best-in-class products and branding support, the forecast to improve your margins and profits get even better.
Let’s get the power of science working for you today. Contact us to transform your wash to Titanium TX4 and watch your profits soar.